|
Our headstage amplifiers are miniature, unity gain buffer amplifier circuit with AC-coupled inputs which are intended to be located directly at the recording site, and isolate the preparation from the cable connecting it to the recording system. They are usually "tethered" or connected to the recording system preamplifier by means of very low noise hearing-aid wire. The tether cable is typically cut to lengths of 3 m or less to minimise noise-pickup ahead of the preamplifier, but different lengths can be supplied.
Features:
▪ Available in a variety of sizes and formats, and with numbers of channels ranging from 4 to 32 per module
▪ Further miniaturisation is a constant design activity at Axona as new electronic technologies permit
|
